Lexus LS600h - Driving Procedures; Power (Ignition) Switch

241
4
Driving
LS600h/LS600hL_EE(OM50D61E)
4-2. Driving procedures
Turn the power switch to ON mode (P. 242) and check that the
parking brake is set.
Check that the shift lever is set in P.
Firmly depress the brake pedal.
The power switch indicator will turn green. If the indicator does not turn
green, the hybrid system cannot be started.
Press the power switch.
After a while, the “READY” indi-
cator comes on with a beep sound.
The vehicle can move when the
“READY” indicator is on even if
the engine is stopped.
Continue depressing the brake
pedal until the hybrid system is
completely started.
The hybrid system can be started
from any power switch mode.
Check that the “READY” indicator is on.
The vehicle will not move when the “READY” indicator is off.
Power (ignition) switch
Performing the following operations when carrying the electronic
key on your person starts the hybrid system or changes power
switch modes.
Starting the hybrid system
1
2
3
4
5