183
3-3. Adjusting the seats
3
Operation of each component
LS600h/LS600hL_EE(OM50D61E)
The seat and steering wheel are automatically adjusted to allow the
driver or front passenger to enter and exit the vehicle easily.
Driver’s seat
When all of the following
have been performed, the
driver’s seat and steering
wheel are automatically
adjusted to a position that
allows driver to enter and exit
the vehicle easily.
• The shift lever has been
shifted to P.
• The power switch has been
turned off.
• The driver’s seat belt has
been unfastened.
When any of the following has been performed, the driver’s seat
and steering wheel automatically return to their original posi-
tions.
• The power switch has been turned to ACCESSORY mode.
• The driver’s seat belt has been fastened.
Front passenger’s seat
If the front passenger’s door is opened while the vehicle is
stopped, the adjusted lumbar/pelvic support (if equipped), otto-
man (if equipped), etc. will return to its original position.
Power easy access system
To Next Page
Loading...
