207
3-3. Adjusting the seats
3
Operation of each component
LS600h/LS600hL_EE(OM50D61E)
Pressing the “C” button will dis-
able the seat position recall or
seat return function.
The indicator light comes on when
the function is disabled.
Pressing the button again will
enable the seat position recall or
seat return function.
Seat return function linked to the door opening operation
Operating conditions
The power switch is in ON mode.
Canceling operation partway through
During the seat return operation, performing either of the following actions
cancels the operation:
• Pressing the “SET”, “M” or “C” button
• Pressing any of the seat adjustment switches
Seat return operation after turning the power switch off
The seat will automatically return to the neutral position if the door is
opened within approximately 45 seconds of the power switch being turned
off.
Disabling the seat return function
Seat adjustment caution
Take care during seat adjustment so that the rear passengers do not strike
the front seats.
To Next Page
Loading...
