303
4-5. Using the driving support systems
4
Driving
LS600h/LS600hL_EE(OM50D61E)
Pressing the button changes the
vehicle-to-vehicle distance as
follows:
Long
Medium
Short
The vehicle-to-vehicle distance is
set automatically to long mode
when the power switch is turned to
ON mode.
If a vehicle is running ahead of
you, the preceding vehicle mark
will also be displayed.
Select a distance from the table below. Note that the distances
shown correspond to a vehicle speed of 80 km/h (50 mph). Vehicle-
to-vehicle distance increases/decreases in accordance with vehicle
speed. When the vehicle is stopped by system control, the vehicle-
to-vehicle distance will be about 3 m (10 ft.) to 5 m (16 ft.) regard-
less of the vehicle-to-vehicle distance setting.
Changing the vehicle-to-vehicle distance
Preceding
vehicle
Type A
Type B
Vehicle-to-vehicle distance settings
Distance options Vehicle-to-vehicle distance
Long Approximately 50 m (160 ft.)
Medium Approximately 40 m (130 ft.)
Short Approximately 30 m (100 ft.)
To Next Page
