77
1-1. For safe use
1
For safety and security
LS600h/LS600hL_EE(OM50D61E)
Rear-facing Baby seat/child seat
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
Run the seat belt through
the child restraint system
and insert the plate into the
buckle. Make sure that the
belt is not twisted.
Install a locking clip near the
tab of the lap and shoulder belt
by inserting the lap and shoul-
der webbing through the
recesses of the locking clip.
Buckle the belt again. If the
belt has any slack, release the
buckle and reinstall the lock-
ing clip.
Installing child restraints using a seat belt
To Next Page
Loading...
