STEERING CONTROL ECU (for RHD) > REMOVAL
for Preparation Click here
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
After the engine switch is turned off, the navigation system requires approximately 90 seconds to record various types of memory
and settings. As a result, after turning the engine switch off, wait 90 seconds or more before disconnecting the cable from the
negative (-) battery terminal.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected ( Click here).
2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
a. Detach the 9 claws and remove the panel pad.
3. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH
a. Detach the clip and remove the cover.
4. REMOVE INSTRUMENT SIDE PANEL RH
a. w/o Airbag Cut Off Switch:
To Next Page
Loading...
