Lexus LX - Page 30

VANE PUMP > INSTALLATION
for Preparation Click here
1. INSTALL VANE PUMP ASSEMBLY
a. Install the vane pump with the 2 bolts.
Torque:
21 N*m{ 214 kgf*cm , 15 ft.*lbf }
2. CONNECT PRESSURE FEED TUBE
a. Install a new gasket to the pressure feed tube.
b. Connect the pressure feed tube with the union bolt.
Torque:
50 N*m{ 510 kgf*cm , 37 ft.*lbf }
3. CONNECT POWER STEERING OIL PRESSURE SENSOR CONNECTOR
a. Connect the connector.
b. Attach the wire harness clamp.
4. CONNECT SUCTION HOSE
a. Connect the suction hose to the vane pump assembly with the clip.