Lexus LX - Page 470

21. INSTALL TILT AND TELESCOPIC SWITCH
a. Attach the claw to install the switch.
b. Connect the switch connector.
22. INSTALL UPPER STEERING COLUMN COVER
a. Attach the claw to install the upper steering column cover.
b. Attach the 4 clips to install the upper steering column cover onto the instrument
cluster finish panel.
23. INSTALL LOWER STEERING COLUMN COVER
a. Attach the 2 claws to install the lower steering column cover.
NOTICE:
Do not damage the tilt and telescopic switch.
b. Install the 3 screws.
Torque:
1.5 N*m{ 15 kgf*cm , 13 in.*lbf }
24. ADJUST SPIRAL CABLE
a. Check that the engine switch is off.
b. Check that the cable is disconnected from the battery negative (-) terminal.
CAUTION: