15. REMOVE TIE ROD END SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
16. DISCONNECT PRESSURE FEED TUBE ASSEMBLY
a. Remove the clamp and disconnect the pressure feed tube (return tube side)
from the power steering link.
b. Using a union nut wrench, disconnect the pressure feed tube (pressure feed
tube side) from the power steering link.
c. Remove the 2 bolts and disconnect the pressure feed tube clamp.
17. REMOVE FRONT SUSPENSION REBOUND STOPPER SUB-ASSEMBLY LH
To Next Page
Loading...
