7. REMOVE STEERING RACK END SUB-ASSEMBLY
a. Using a wrench, hold the steering rack (LH side).
b. Using SST, remove the steering rack end (LH side) from the power steering
rack.
SST
09922-10010
HINT:
Rotate SST in the direction shown in the illustration.
c. Using SST, remove the steering rack end (RH side) from the power steering
rack.
SST
09922-10010
HINT:
Rotate SST in the direction shown in the illustration.
NOTICE:
Do not mistake the direction of SST.
Make sure to keep the power steering rack fixed in place with
SST.