Lexus LX - Page 545

STEERING LINKAGE > INSTALLATION
for Preparation Click here
1. INSTALL POWER STEERING LINK ASSEMBLY
a. Install the power steering link with the 3 bolts and 3 nuts.
Torque:
120 N*m{ 1224 kgf*cm , 89 ft.*lbf }
HINT:
Hold the bolts and tighten the nuts to install the power steering link.
NOTICE:
Align the center bush so that the protrusion aligns with the longitudinal axis of
the vehicle.
2. INSTALL FRONT SUSPENSION REBOUND STOPPER SUB-ASSEMBLY LH
a. Remove the 3 bolts and suspension rebound stopper LH.
3. INSTALL FRONT SUSPENSION REBOUND STOPPER SUB-ASSEMBLY RH
a. Install the suspension rebound stopper RH with 3 bolts.
Torque:
58 N*m{ 591 kgf*cm , 43 ft.*lbf }
4. INSTALL PRESSURE FEED TUBE ASSEMBLY
a. Install the pressure feed tube clamp with the 2 bolts.
Torque:
18 N*m{ 184 kgf*cm , 13 ft.*lbf }