Starting the hybrid system
Performing the following operations when carrying the electronic key on your
person starts the hybrid system or changes power switch modes.
Starting the hybrid system
1 Check that the parking brake is set.
The parking brake indicator will come on.
2 Firmly depress the brake pedal.
and a message will be displayed on the multi-information display. If it is not
displayed, the hybrid system cannot be started.
When the shift position is N, the hybrid system cannot start. Shift the shift position to P
when starting the hybrid system.
3 Press the power switch shortly and firmly.
When operating the power switch, one short, firm
press is enough. It is not necessary to press and
hold the switch.
If the "READY" indicator turns on, the hybrid sys-
tem will operate normally.
Continue depressing the brake pedal until the
"READY" indicator is illuminated.
The hybrid system can be started from any power switch mode.
4 Check that the "READY" indicator is illuminated.
The vehicle will not move when the "READY" indicator is off.
Changing the power switch mode
Modes can be changed by pressing the power switch with brake pedal released.
(The mode changes each time the switch is pressed.)
When Driving
16
To Next Page
Loading...
