AHB (Automatic High Beam)
The Automatic High Beam uses a front camera located on the upper portion of the
windshield to detect the brightness of the lights of vehicles ahead, streetlights, etc.,
and automatically changes the head lights between the high beams and low beams.
Using the Automatic High Beam system
1 Press the Automatic High Beam switch.
2 Turn the headlight switch to the [AUTO] or
[ ] position.
When the headlight switch lever is in the low
beam position, the AHS system will be enabled
and the AHB indicator will illuminate.
Turning the high beams on/off manually
■
Changing to the high beams
● Push the lever forward.
The Automatic High Beam indicator will turn off
and the high beam indicator will turn on.
Pull the lever to its original position to enable the
Automatic High Beam system again.
When Driving
31
To Next Page
Loading...
