504
4-3. Do-it-yourself maintenance
RX350/270_EE
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown.
If this happens, check and replace the fuses as necessary.
Turn the “ENGINE START STOP” switch off.
After a system failure, see “Fuse layout and amperage ratings”
for details about which fuse to check. (→P. 507)
Remove the engine compartment cover. (→P. 470 )
Open the fuse box cover.
Engine compartment
Push the tab in and lift the lid off.
Driver’s side instrument panel
Remove the lid.
STEP 1
STEP 2
STEP 3
STEP 4
RX350_270_EE_48D77E.book 504 ページ 2014年1月24日 金曜日 午前10時4分