HYBRID VEHICLE OVERVIEW
6
Traction battery status
BRY193
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Level 7
Level 8
Status
The multi−
information
display
The navigation
system screen
STARTING YOUR VEHICLE
The starting procedure is the same as that for
conventional vehicles.
Insert the key into the ignition and turn it to the “START”
position.
The “READY” light flashes and stays on. A beep sounds after
a few seconds, and the hybrid system will start. If the ambient
temperature is low, it may take time until the “READY” light
comes on. For details, see “How to start the hybrid system” on
page 410.
The engine may not start even with the “READY” light on.
To Next Page
