Lowes.com/allenandroth
ASSEMBLY INSTRUCTIONS
6. To install the battery (H), unscrew the rubber
cap of the electric ignitor (J) and place battery
(H) into the battery case. Make sure the
positive pole (“+”) faces out towards the cap.
Screw the cap back onto the electric
ignitor (J) tightly.
7. Place the lava rocks (F) evenly in the re bowl
(A).
6
7
J
H
F
A
The screen in this re table MUST be clear and free
of obstructions at all times to ensure proper operation.
Make sure the re table is covered completely with lava
rocks lest the ame extinguish occasionally.
CAUTION