9. Intercom Talk
Basic Function
CALL FROM 104
12 OCT 09 12:00 pm
TRANS CONF MUTE
TRANS : Press to transfer an incoming call to another
station.
CONF : Press to initiate a conference call.
MUTE : Press to mute the handset, speakerphone,
or headset microphone. Press the [SPEAK]
button to re- activate microphone.
CALL FROM 104
12 OCT 09 12:00 pm
ACNR FLASH PRIVACY
ACNR : Press to set automatic called number redial.
FLASH : Press to disconnect the line and re-seize.
PRIVACY : Press to use privacy mode.
Press programmed flexible button for CO
10.1 Manual Dialing
The following CO access codes ‘9’, individual CO access code can be changed by Admin
Programming 115 depending on the user’s needs.
LINE 08 00:00:03
TRANS CONF MUTE
.
(CO can be accessed by dialing CO access code 9 or
individual CO access code)
Dial telephone number.
10.2 Speed Dialing
SPD_NO LAST(*) SAVE(#)
BACK SEARCH ADD
Press [SPEED] button.
Press SEARCH to search speed dial by name
Dial number to seach name
EDIT : Press EDIT to edit speed bin
ERASE : Press ERASE to delete speed bin
>ABC : 9123456789
BACK: Press BACK to go to privious menu
: Press SEND to make a call
If o ish to terminate a call and make
EXIT : Press EXIT to exit Speed Menu
BUSY
FLASH
another call, press [FLASH] to re-seize dial
tone.
13