Setup and Upgrade
205
3 When the Create New Password screen appears, enter a password and press the [Enter] key. The
password should not exceed 20 characters and should consist of English letters (A - Z), numbers
(0 - 9), and special characters or a combination of them.
4 When the Confirm New Password screen appears, enter the password once again and press the
[Enter] key.
5 To save the changes in the system setup, press [F10].
6 When the Save & Reset screen appears, select [Yes] and press the [Enter] key. The PC will restart.
TIP
• The Supervisor Password gives one the authority to set all items in System Setup and to
set [Power on Password]. It is advisable to use a User Password if other persons also
use the computer.
ENGLISH
To Next Page
Loading...
