Setup and Upgrade
189
3 When the following message shows up on the screen, enter the password and press [Enter]. The
password must not exceed 8 characters in total and must consist of letters (A - Z), numbers (0 -
9), special characters or their combination.
4 When the following message appears, select and press [Enter].
5 To save the changes in the system setup, press [F10].
6 When the following message appears, select [Yes] and press [Enter]. The PC will restart.
TIP
• [User Password] allows limited access to the items in the System Setup compared to the
[Supervisor Password] item.
ENGLISH
To Next Page
Loading...
