LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 6 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
1. Application range
This specification is applied to LED LCD TV used LT01S
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature : 25 ºC ± 5 ºC
2) Relative Humidity : 65 ± 10 %
3) Power Voltage : Standard input voltage (100-240V~50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE / ICE / BSMI specification
EMI: CE / ICE / BSMI
4. Electrical Spec.
No. Item Specification Remark
1 Display Screen Device 19, 22 inch
2 Aspect Ratio 16:9
3 LCD Module 19 inch TFT LCD Module
22 inch TFT LCD Module
4 Storage Environment Temp. : -20 deg ~ 60 deg
Humidity : 0 ~ 85 %
5 Operating Environment Temp. : 0 deg ~ 40 deg
Humidity : 0 ~ 85 %
6 Input Voltage AC 100-240 V~ 50 / 60 Hz
7 Power Consumption 22” 30.7W FHD
19” 27.4W HD
7 LCD Module(LGD) 19”(AUO) 430.4 X 254.6 X 9.9 mm
22”(CMI) 495.6 X 292.2 X 11.5 mm
22”(AUO) 495.6 X 292.2 X 10.3 mm
To Next Page
Loading...
