If you select
Yes
the size and image quality are optimised for your PC.
If you select
No
the size and image quality are optimised for the AV device (DVD player, set-top
box, gaming device).
If you select
Do not show message again
this message does not appear until the TV is reset.
You can change the set value in
SETTINGS
s
OPTION
s
Input Label
.
If you want to use HDMI-PC mode, you must set the input label to PC mode.
The OSD (On Screen Display) is displayed on the screen as shown below.
»
When turning the product on in
HDMI
input.
»
When switching to
HDMI
input.
NOTE
Is the input connected to your PC?
Do not show message again.
No
Yes
To Next Page
Loading...
