LG 26LT670H User Manual (English)

Other manuals for LG 26LT670H

Questions and Answers:

T
traceyfloresJul 31, 2025
What to do if my LG LCD TV has no picture?
- R
  Robert SheppardJul 31, 2025
  If your LG LCD TV shows no picture, start by ensuring the TV is turned ON. Check that the antenna or cable is correctly connected to the TV. Verify all connections to the TV are correct. If you are using an MPI device, ensure the MPI cable is connected. If you're watching an encrypted program, try switching to another channel. Finally, check the Installer Menu settings to ensure the tuning band is correctly adjusted.
M
Martin JohnsonAug 8, 2025
Why is my LG 26LT670H LCD TV remote not working?
- J
  Jessica SmithAug 8, 2025
  If the remote for your LG LCD TV isn't working, first ensure the 'TV' mode is selected on the remote using the MODE key. Then, point the remote directly at the IR receiver on the TV, ensuring you're close enough and there are no obstructions in the path. Weak batteries can also cause this issue, so replace them, making sure the '+' and '-' polarities match the markings in the battery compartment. Too much light in the room can interfere with the signal, so dim the lights. If none of these steps work, you may need a compatible Installer Remote, so contact your LG dealer.
S
shannon35Aug 15, 2025
Why does my LG 26LT670H LCD TV have sound problems?
- J
  Jacob PalmerAug 15, 2025
  If your LG LCD TV has a normal picture but poor or no sound, first press the MUTE button or use the Volume Up key to increase the sound level. If that doesn't work, the issue might be with the broadcast itself, so try changing to a different channel.
D
Daniel Thomas DDSAug 22, 2025
How to fix LG 26LT670H when I can't enter channel number?
- S
  Stephen MorrisAug 22, 2025
  If you cannot directly enter a channel number on your LG LCD TV, it might be because the TV is in Pass-through Mode and the Installer Menu item 028 CH. OVERIDE is set to 0 (disabled). To enable direct keypad entry, set CH. OVERIDE to 1. Alternatively, if the TV is in FTG Mode, the channel you're trying to enter might not be part of the FTG Channel Map. In this case, you may need to make changes to the FTG Channel Map using the FTG File Manager or the FTG Configuration Application.

LG 26LT670H Specifications

General

Display diagonal	26 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Native refresh rate	60 Hz
Contrast ratio (dynamic)	1000000:1
Supported graphics resolutions	-
3D	No
Headphone connectivity	3.5 mm
Number of AV connections	3
Annual energy consumption	75 kWh
Storage temperature (T-T)	-20 - 60 °C
Number of tuners	1 tuner(s)
Supported TV bands	CATV, UHF, VHF
Analog signal format system	NTSC
Digital signal format system	ATSC
RMS rated power	10 W
Number of speakers	2
USB 2.0 ports quantity	1
Video formats supported	H.264, MPEG2, MPEG4
Product color	Black
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	38 W
Sustainability certificates	ENERGY STAR
Package depth	119.38 mm
Package width	685.8 mm
Package height	533.4 mm
Package weight	6713.167 g
Operating temperature (T-T)	0 - 40 °C