LG 32LC2D - Hdstb

26
Installation
When
connecting
with a D-sub 15
pin
cable
1
2
3
4
Connect the RGB
output
of the
digital set-top
box
to the RGB
(PC/DTV) jack
on the set.
Connect the audio
outputs
of the
set-top
box to
the AUDIO
(RGB/DVI) jack
on the set.
Turn on the
digital set-top
box.
(Refer
to the
owner's manual for the
digital set-top box.)
Select RGB-DTV
input
source with
using
the
INPUT button on the remote control.
-
This TV can receive
Digital
Over-the-air/Cable
signals
without an external
digital set-top
box.
However,
if
you
do receive
Digital signals
from a
digital set-top
box or other
digital
external
device,
refer to the
figure
as shown below.
(R)
AUDIO
(L)
RGB-DTV OUTPUT
RGB IN
AUDO(RGBDV)
REMOTE
Digital Set-top
Box
HDSTB
Setup
1
2
When
connecting
with a HDMI cable
1
2
3
Connect the HDMI
output
of the
digital set-top
box to the HDMI/DVI IN
jack
on the set.
Select HDMI/DVI
input
source with
using
the
INPUT button on the remote control.
Turn on the
digital set-top
box.
(Refer
to the
owner's manual for the
digital set-top box.)
Digital Set-top
Box
?
TV can receive the video and audio
signal simultaneously
with
using
a HDMI cable.
?
If the
digital set-top
box
supports
Auto HDMI
function,
output
resolution of the
digital set-top
box will
be
automatically
set to
1280x720p.
?
If the
digital set-top
box does not
support
Auto
HDMI,
you
need to set the
output
resolution
appro-
priately.
To
get
the best
picture quality, adjust
the
output
resolution of the
digital set-top
box to
1280x720p.
HDMI-DTV OUTPUT
DIGITAL AUDIO
OUT
RS 232C N
(CONTROL V CE)
1