To Next PageTo Next Page
Need help?Do you have a question about the LG 32LC51-ZA and is the answer not in the manual?
General| Screen Size | 32 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 5000:1 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Viewing Angle | 178°/178° |
| Input Ports | HDMI, Component, Composite, RGB |
Essential replacement of special safety parts to prevent hazards.
General recommendations for safe servicing procedures.
Procedure to check AC leakage current at cold state.
Procedure to check AC leakage current at hot state.
General guidelines for safe servicing practices and component handling.
Precautions and techniques for handling static-sensitive components.
Guidelines for proper soldering techniques and equipment.
Procedures for removing and replacing various electronic components.
Guidelines for repairing damaged copper traces on circuit boards.
Specifies the range of application for this manual.
Details the conditions required for testing components.
Outlines the methods for performance and specification testing.
Provides general specifications for the LCD module.
Specifies model details relevant to the EU market.
Details supported resolutions and frequencies for component video input.
Lists supported resolutions and frequencies for RGB analog PC input.
Details supported resolutions and frequencies for HDMI digital TV input.
Specifies the scope of application for adjustment instructions.
Lists general specifications relevant to the adjustment process.
Lists the specific items to be adjusted.
Method for PCB assembly adjustment using download program.
Steps for installing the download program and drivers.
Method for downloading software to the PCB assembly.
Alternative method for software download using AV Plate Assembly.
Software download method for the SET assembly.
Procedure for downloading channel memory data.
Changing tool and area options before PCB check.
Process for adjusting color carrier during inspection.
Steps for adjusting EDID data for analog-RGB.
Lists necessary equipment for white balance adjustment.
Diagram for connecting equipment for automatic white balance adjustment.
Manual adjustment procedure for white balance.
Procedure to input shipping option data.
Default values for adjustment parameters.
Internal tests performed during adjustment.
Specifications related to sound output.
Troubleshooting steps for "No power" symptom.
Troubleshooting steps for "Protect mode" symptom.
Troubleshooting steps for "No Raster" symptom.
Troubleshooting for unusual display in RF mode.
Troubleshooting for unusual display in rear AV mode.
Troubleshooting for unusual display in Side AV mode.
Troubleshooting for unusual display in Side S-Video mode.
Troubleshooting for unusual display in SCART 1 mode.
Troubleshooting for unusual display in SCART 1 RGB mode.
Troubleshooting for unusual display in SCART 2 mode.
Troubleshooting for unusual display in component 1 mode.
Troubleshooting for unusual display in component 2 mode.
Troubleshooting for unusual display in RGB mode.
Troubleshooting steps for "No Sound" symptom.
Troubleshooting for issues related to HDMI mode.
Diagram for SCART input signals.
Diagram for analog inputs and UART communication.
Diagram for digital input signals, including HDMI.
Diagram for the main tuner section.
Schematic for the audio amplifier and related circuits.
Schematic for the panel LVDS interface.
Schematic for the power supply section.
Schematic for temperature and fan sensors.
Schematic for the video decoder IC.
Diagram of the scaler component.
