To Next PageTo Next PageHow to clean LG LCD TV screen?
To clean your LG LCD TV screen, wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Ensure excess water is off the screen, and allow it to air-dry completely before turning the TV on.
What to do if the LG TV remote doesn't work?
If the LG TV remote is not working, ensure the remote is set to TV mode using the MODE key. Point the remote directly at the TV's IR receiver, and make sure you are close enough to the TV. Remove any obstructions between the remote and the TV. Replace the batteries, ensuring they are inserted with the correct polarity (+ and -). Dim the room light if there is too much light. If applicable, connect MPI cable to MPI device. If the problem persists, you may need a compatible Installer Remote. Contact your LG dealer.
What to do if leaving LG 32LD310H for extended absence?
If you anticipate your LG LCD TV will be unused for an extended period, like during a vacation, unplug the power cord. This precaution helps protect the TV from potential damage due to lightning strikes or power surges.
How to clean LG 32LD310H cabinet?
To clean the cabinet of your LG LCD TV, wipe it with a soft, dry, lint-free cloth to remove any dirt or dust. Avoid using a wet cloth.
Why is there no picture on my LG TV?
If there is no picture on your LG TV, first ensure that the TV is turned on. Check that the antenna or cable is properly connected to the TV. Verify all connections are correct. If applicable, connect the MPI cable to the MPI device. If you're watching an encrypted program, try switching to another channel. Also, check and adjust the Installer Menu settings for the correct tuning band.
How to fix LG TV with normal picture but no sound?
If your LG TV has a normal picture but poor or no sound, first check if the audio is muted. Press the MUTE button or use the Volume Up key to increase the sound level. If the issue persists, the problem may be with the broadcast itself, so try changing to a different channel.
Why can't I enter channel numbers directly on my LG TV?
If you cannot directly enter a channel number on your LG TV, and the TV is in Stand-alone Mode, check if Installer Menu item 028 CH. OVERIDE is set to 0 (disabled). If so, set CH. OVERIDE to 1 to enable direct keypad entry for all channels. If your TV is in FTG Mode, the channel you're trying to enter may not be part of the FTG Channel Map. Use the FTG Configuration Application to make changes to the FTG Channel Map if necessary.
General| Screen Size | 32 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Type | LCD |
| HDMI Inputs | 2 |
| USB Ports | 1 |
| Weight | 8.6 kg |
| Aspect Ratio | 16:9 |
| Sound Output | 10W + 10W |
