LG 32LD350 - Page 28

Removing the BallastRemoving the Ballast
Ballast comes with the Panel
Remove the 6 screws
indicated by the arrows.
Remove the Inverter Cover.
Disconnect CN1.
Use caution do not allow screws to fall
Use
caution
,
do
not
allow
screws
to
fall
.
NOTE: If Servicing the Board, return the
screws to provide stability and grounding.
CN1
Lift the Board up slightly on
the right side and slide the
board to the right to release
the board from the Backlight
connectors.
Backlight
connector
November LCD TV 32LD350
28