47
EXTERNAL EQUIPMENT SETUP
1
or
Select PICTURE.
2
Select Screen (RGB-PC).
3
Select Auto config.
4
Select Yes.
5
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, try using the manual settings or a different resolution or refresh rate on the PC.
• If the position of the image is still not
correct, try Auto adjustment again.
• If picture needs to be adjusted again after
Auto adjustment in RGB-PC, you can adjust
the Position, Size or Phase.
EnterMove
PICTURE
D
• Brightness 50
• Sharpness 50
• Color 50
• Tint 0
R G
• Advanced Control
• Picture Reset
Screen (RGB-PC)
SCREEN
Move
Prev.
Resolution
To Set
Yes
No
Auto Config.
Position
Size
Phase
Reset