LG 32LF20FR - Specification

Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
- 6 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
4. Electrical specification
- General Specification
1. Application range
This spec sheet is applied to LCD TV used LP91A chassis.
2. Specification
Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage(100-240V@50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC : CE, IEC
No Item Specification Measurement Remark
1 Screen Size 32” wide Color Display Module Resolution : 1920*1080
2 Aspect Ratio 16:9
3 LCD Module 32” TFT WUXGA LCD
4 Operating Environment Temp.: 0 ~ 40 deg
Humidity : 0 ~ 85 %
5 Storage Environment Temp.: -20 ~ 60 deg
Humidity : 0~ 85 %
6 Input Voltage AC100-240V~, 50/60Hz
≤ 170 W 32” FHD
7 LDC Module FHD 760 x 450 x 48 Unit : mm
(Maker : LGD) 0.36375 x 0.36375 [with inverter]
18 EEFL
Coating 3H