LG 32LF500BUA - Page 14

Product Disassembly Process
List the basic steps that should typically be followed to remove components and materials requiring
selective treatment:
1.OPTIONAL: Depending upon the complexity of the disassembly process, a graphic depicting the locations
of items contained within the product which require selective treatment
(with descriptions and arrows identifying locations) can be inserted below:
1
Unlock screw (“A-12EA”) to separate back cover assembl
y. Unlock screw(“B”)
[Fig.1]
2
Unlock screws (“C”-4EA) to separate speaker assembly from back
cover.
[Fig.2]
3
Unlock Cushion (“D”-3EA”) to separate CUSHION from back cover.
[Fig.3]
4
Unlock screws (“F”-2EA)to separate Key from Panel. Unlock screws ( “G”-1EA) to separate
receive board from front cover. Unlock Cushion(H) from line
[Fig.4]
5
Unlock Ferrite Ring (“I”) to separate Main B from Panel.
[Fig.5]
6
Unlock screw (“J”-4EA) to separate Main
board from Panel. Unlock AV bracket (“K”-2EA)
[Fig.6]
7
Separate Cushion (L) from the AV Bracket .
[Fig.7]
8
Remove Cushion (“M”-9EA) from Panel.
[Fig.8]
9
Unlock screw (“N”-4EA) to separate Stand from Base. Remove Rubber Foot (“O”-6EA) fr
om Base.
[Fig.9]
- 14 -
LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes