18
APPENDIX
ENGLISH
TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk..
A
Press the VOL
++
or
--
button.
A
Sound muted? Press MUTE button.
A
Try another channel. The problem may be with the broadcast.
A
Are the audio cables installed properly?
A
Adjust Balance in menu option.
A
A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
A
Check HDMI cable over version 1.3.
A
Check USB cable over version 2.0.
Picture OK & No sound
Unusual sound from
inside the TV
No sound when
connecting HDMI or
USB
No output from one
of the speakers
*This feature is not available for all models.
TThheerree iiss aa pprroobblleemm wwiitthh PPIICCTTUURREE sseettttiinnggss..
A
It means that the TV is currently set to
IInn SSttoorree
mode.
To switch to
HHoommee
mode you should do the followings:
From the TV Menu, Choose
OOPPTTIIOONN FFaaccttoorryy MMooddee FFaaccttoorryy
RReesseett
Press
OOKK
button.(Use NUMBER buttons to input a 4-digit pass-
word. Wait for a few seconds for the TV to download again) Choose
LLaanngguuaaggee
Choose
CCoouunnttrryy
Choose
HHoommee
OSD "
WWEELLCCOOMMEE
"
appears Press
OOKK
button. Program search will begin automatically (You can
stop the search by pressing the
OOKK
button). Now, you have completed switch-
ing to the
HHoommee
mode.
When the user changes
the picture settings, the
TV automatically converts
back to the initial settings
after a certain period of
time.
To Next Page
Loading...
