LG 32LG500H - Page 16

- 16 -
* AV INPUT MODE
* PC INPUT MODE
9. Test factor for commercial model
9.1. IR In/ Out Check
(1) Check Order 'Pass' Judgment
1) Insert RJ45 Cable, RS-232C Cable 2EA. Phone Jack to
each Port as below Picture.
2) Change the Mode 'PTC Only' On OSD(In-start -> Uart
Control -> Download -> PTC1)
3) Running the 'IR/MPI Check Program' on PC
4) Click the 'AUTO Run' or 'Push the Spacebar' on the
keyboard
5) If the Sign is 'NG' try One More as 'Push the Spacebar'
6) Confirm the 'OK' Sign on Screen that means IR in & MPI
Test Pass / 'NG' Sign is NG
Confirm the 'PASS' Sign of IR Out Check JIG / 'NG'
Sign is NG
7) After finish Check. Change the Mode 'D-Box On'(In-start
-> Uart Control -> D-Box 'ON')
(2) Needs JIG & Equip. & Cable
PC('MPI/IP In' Check Program. RS-232C 2Port), IR Out
Check Jig(With level Shifter), 232C to Phone jack Cable,
5V Adapter, 232C Cable(Cross) 232C Cable(Cross) 2EZ,
RJ45(Direct) Cable.
LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
WHITE BALANCE “J”(A~F)
Adjustment CMD SET ID VAL Comment
RED GAIN JA 0~99 0~FE 0:0, FE:FE , FF: Current state
GREEN GAIN JB 0~99 0~FE 0:0, FE:FE , FF: Current state
BLUE GAIN JC 0~99 0~FE 0:0, FE:FE , FF: Current state
RED OFFSET JD 0~99 0~FE 0:0, FE:FE , FF: Current state
GREEN OFFSET JE 0~99 0~FE 0:0, FE:FE , FF: Current state
BLUE OFFSET JF 0~99 0~FE 0:0, FE:FE , FF: Current state
ISM METHOD JP 0~99 0~3
Normal, White wash, Orbiter, Inversion
Orbit Time JR 0~99 1~FE 1: 0, FE:254, , FF: Current state
Orbit Pixel JS 0~99 1~3 1: 1pixel, 3: 3pixel, FF: Current state
AUTO CONFIG. JU 0~99 01 If it isn’t Auto Adjust Condition(),
send NACK
FACTORY IR
IR CODE MC 0~99 Over F0 IR CODE 0, BITMASK = 0X01
or 51
ADC Calriblation
Red,Blue,Green Ja,Jb, Directional Min:00 Initial value : red -0x79
Gain Jc : 00<E0 Max:fe blue -0x6f
green -0x80
Red,Blue,Green Jd,Je, 00<90 Min:00 Initial value : red -0x80
Offset Jf Max:fe blue -0x82
green -0x80
Item Min Typ Max Unit
Brightness uniformity 75 % Full white
Color Purity RED X 0.605 0.635 0.665 Full Signal Swing
Y 0.310 0.340 0.370
GREEN X 0.239 0.269 0.299
Y 0.576 0.606 0.636
BLUE X 0.117 0.147 0.177
Y 0.039 0.069 0.099
Color coordinate WHITE X 0.253 0.283 0.313
(Normal) Y 0.268 0.298 0.328
WHITE X 0.244 0.274 0.304
(COOL) Y 0.265 0.295 0.325
WHITE X 0.267 0.297 0.327
(WARM) Y 0.293 0.323 0.353
Item Min Typ Max Unit
Brightness uniformity 75 % Full white
Color Purity RED X 0.605 0.635 0.665 Full Signal Swing
Y 0.310 0.340 0.370
GREEN X 0.239 0.269 0.299
Y 0.576 0.606 0.636
BLUE X 0.117 0.147 0.177
Y 0.039 0.069 0.099
Color coordinate WHITE X 0.250 0.280 0.310
(Normal) Y 0.265 0.295 0.325
WHITE X 0.245 0.275 0.305
(COOL) Y 0.264 0.294 0.324
WHITE X 0.266 0.296 0.326
(WARM) Y 0.292 0.322 0.352