- 17 -
9.2. Lodgenet Card & Auto Camport Check
9.3. RJP(Remote Jack Pack) Check
(1) Check Order 'Pass' Judgment
1) Connecting RJP Test JIG & RJP Port of Set with Modem
Cable(8Pin)
2) Check the RJP operation on OSD(In-start -> RJP Pin
Check ->
G
3) 'SUCCESS! PIN CONNECTION OK' -> PASS
4) 'Pin Check Fail!!!!' -> NG
5) If the Result is 'NG', try One More
(2) Needs JIG & Equip. & Cable
1) RJP Check JIG, Modem Cable (8 Pin)
9.4. MPI Card Check
10. Input the Shipping Option Data
1) Push the ADJ key in an Adjust Remote controller.
2) Input the Option Number that was specified in the BOM,
into the Shipping area.
3) The work is finished, Push
A Key.
LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
To Next Page
Loading...
