Need help?Do you have a question about the LG 32LH500D and is the answer not in the manual?
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 32 \ |
| Display brightness | - cd/m² |
| Display resolution | 1366 x 768 pixels |
| Native aspect ratio | 16:9 |
| LED backlighting type | Direct-LED |
| Display diagonal (metric) | 80 cm |
| Motion interpolation technology | - |
| 3D | No |
| Annual energy consumption | 49 kWh |
| Tuner type | Analog & digital |
| Digital signal format system | DVB-C, DVB-T2 |
| RMS rated power | 12 W |
| Number of speakers | 2 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 1 |
| Product color | Black |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 33 W |
| Package depth | 142 mm |
| Package width | 808 mm |
| Package height | 512 mm |
| Package weight | 6800 g |
Weight and Dimensions| Depth (with stand) | 179.5 mm |
|---|---|
| Height (with stand) | 429 mm |
| Depth (without stand) | 77 mm |
| Width (without stand) | 727 mm |
| Height (without stand) | 428 mm |
| Weight (without stand) | 5000 g |
General advice for safe servicing, including isolation transformers and handling components.
Procedure for checking AC leakage current with the unit unplugged and chassis grounded.
Procedure for checking AC leakage current with the unit plugged in, using a resistor and capacitor.
Basic safety rules for servicing, including unplugging power and using proper test equipment.
Techniques to prevent damage to sensitive electronic components from static electricity.
Recommended practices for soldering, including iron temperature, solder type, and cleaning tips.
Defines the range of LED TV models this specification applies to.
Outlines the conditions and procedures for testing the TV components and performance.
Details the methods used for performance and safety testing of the TV.
Lists general specifications like input voltage, screen size, and connectivity for various models.
Details procedures for adjusting ADC and performing white balance calibration.
Steps to prepare a USB drive and copy the firmware file for software upgrade.
Procedures for plugging in the USB, initiating the upgrade, and verifying the version.
To Next Page
