LG 32LJ500D-TA - Audio, Tuning, and System Settings; Audio, Tuning, and Programme Management; Signal, Language, and Location Setup

ENGLISH
12
To set Auto Volume
(Settings) Sound Auto Volume
Sets Auto Volume to On. Varying volume output from programme to
programme is automatically adjusted for convenient TV watching when
clicking through dierent programme.
To use Sound Test
(Settings) Sound Sound Test
Start the Sound Test to check that the sound signal output is normal,
and then select whether there is an error.
If there are no problems in the test, check the connected external device
or broadcast signal.
Using Manual Tuning
(Settings) Programmes Manual Tuning
Adjusts programmes manually and saves the results.
For digital broadcasting, signal strength and signal quality can be
checked.
For analogue broadcasting, you can set up station names and use
ne tuning (except for Satellite mode). Normally ne tuning is only
necessary if reception is poor.
Editing programmes
(Settings) Programmes Programme Manager
Edits the saved programmes.
Set as favourite programme, block/unblock programme, skip
programme etc. of the selected programme.
To select Programme mode
(Settings) Programmes Programme Mode
[This feature is available on certain models only.]
This function allows you to watch a tuned programme in Antenna or
Cable.
• You can only watch programmes in the selected mode.
Data Service Function
(Settings) Programmes Data Service
[This feature is available in certain countries only.]
This function allows users to choose between MHEG (Digital Teletext)
and Teletext if both exist at the same time.
If only one of them exists, either MHEG or Teletext is enabled regardless
of which option you selected.
To use Signal Test
(Settings) Programmes Signal Test
[This function is available on certain models or in certain countries only]
Shows the MUX and Service information etc..
Signal test is only available in Antenna or Cable mode.
To set Language
(Settings) General Language
You can select the language of the menu displayed on the screen and
the digital sound broadcasting.
• Menu Language : Selects a language for the display text.
• Primary Audio Language / Secondary Audio Language :
[In Digital mode Only][The congurable items dier depending
on country.] Selects the desired language when watching digital
broadcasting containing several voice languages.
• Teletext Language : [In Digital mode Only][The congurable
items dier depending on country.] Use the Text language function
when two or more Text languages are broadcast.
• If teletext data in a selected language is not broadcast, the
default Text language will be displayed.
• If you select the wrong local country, teletext may not appear
correctly on the screen and some problems may occur during
teletext operation.
Setting the Location
(Settings) General Broadcast Country
[This feature is available in certain countries only.]
Sets the country that the TV uses.
TV settings are changed according to the broadcast environment of the
selected country.
• If the country setting is changed, the Auto Tuning information
screen may appear.
• In a country that Digital broadcasting regulation isn’t xed, some
DTV functions may not work depending on digital broadcasting
circumstances.
To set current time
(Settings) General Time & Date
Checks or changes the time while watching TV.
• Set Automatically : Synchronizes the TV clock to the digital time
information sent by the TV station.
• Time / Date / Time Zone : [Depending on Country] Sets the time
and date manually if the auto setup does not correspond to the
current time.
• Custom Time Zone : [Depending on Country] When select the
Custom in Time Zone, Custom Time Zone menu is activated.