5
ENGLISH
Preparing
•
factory, initialization of the TV may take a few minutes.
•
•
shown in this manual.
•
or product model that you are using.
• New features may be added to this TV in the future.
• The device must be easily accessed to a location outlet near the
• The items supplied with your product may vary depending on the
model.
•
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
A
B
A
B
*A
10 mm
*B
18 mm
•
•
or a connection error may occur. (Recommended HDMI Cable Types)
- Ultra High-Speed HDMI®/
TM
cable (3 m or less)
• How to use the ferrite core (Depending on model)
- Use the ferrite core to reduce the electromagnetic interference in
the power cord. Wind the power cord on the ferrite core once.
[Wall side ]
[TV side]
10 cm (+ / -2 cm)
Separate Purchase
items. These devices only work with certain models.
The model name or design may be changed depending on the upgrade
of product functions, manufacturer’s circumstances or policies.
Magic Remote Control
(Depending on model)
AN-MR19BA
Check whether your TV model supports Bluetooth in the Wireless
Remote.
Wall Mounting Bracket
(Depending on model)
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
A
B
Model
32/43LM57*
32/43LM56*
32/43LM63*
VESA (A x B) (mm) 200 x 200
Standard screw M6
Number of screws 4
To Next Page
Loading...
Need help?
General
