GP4
ENG
1 Prepare the Smart TV camera for use. If your Smart TV is not equipped
with a camera, install an LG video call camera (sold separately). (For more
information, please refer to the installation manual or owner's manual of the
camera.)
2 The camera is activated 20 to 30 seconds after the TV is switched on.
3 Go to SMART ➾ Settings ➙ OPTION and check if Motion Recognition is
set to On.
4 Stare at the camera while the TV is on and hold your hand up close to your
face. The motion recognition controller appears on the TV screen. (You can
check the motion recognition range of the camera in SMART ➾ Settings
➙ OPTION ➙ Camera Setting Help.)
To Next Page
Loading...
