GP4
enga
Wi-Fi Direct is a function that allows your TV to connect with a Wi-Fi Direct
device without going through a router or gateway. With SmartShare
TM
, you
can watch the files stored on a device connected via Wi-Fi Direct.
1 Set Wi-Fi direct to On. (If you do not use it, please change it to Off.)
2 Enable the Wi-Fi Direct settings on the device that you want to connect to.
3 A list of devices that can be connected to the TV is displayed.
4 Select a device to connect.
5 Select Yes, when the connection request message appears.
6 If the device that you want to connect to accepts the request, Wi-Fi direct is
connected.
To Next Page
Loading...
