To Next PageTo Next Page
Need help?Do you have a question about the LG 32LN575S and is the answer not in the manual?
General| Display diagonal | 32 \ |
|---|---|
| Native aspect ratio | 16:9 |
| Native refresh rate | 50 Hz |
| LED backlighting type | Direct-LED |
| Supported video modes | 1080p |
| Screen format adjustments | 4:3, 14:9, Zoom |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Motion interpolation technology | MCI (Motion Clarity Index) 100 |
| 3D | No |
| Annual energy consumption | 60 kWh |
| Analog signal format system | - |
| Digital signal format system | DVB-C, DVB-S2, DVB-T |
| Audio system | Virtual Surround Plus |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| HDMI version | 1.4 |
| HDMI ports quantity | 3 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 1 |
| Consumer Electronics Control (CEC) | SimpLink |
| Smart modes | Cinema, Game |
| Lifestyle apps | Skype |
| Audio formats supported | AAC, AC3, MP3, PCM |
| Image formats supported | JPG, JPS, MPO |
| Video formats supported | DIVX |
| Product color | Black |
| Power consumption (standby) | - W |
| Cables included | AC |
Weight and Dimensions| Depth (with stand) | 207 mm |
|---|---|
| Height (with stand) | 497 mm |
| Weight (with stand) | 7000 g |
| Depth (without stand) | 79 mm |
| Width (without stand) | 738 mm |
| Height (without stand) | 437 mm |
| Weight (without stand) | 6700 g |
Guidelines for safe and correct servicing of the TV.
Precautions for handling sensitive electronic components to prevent static damage.
Best practices for soldering to ensure reliable connections and prevent damage.
Details on automatic adjustment procedures for TV settings.
Instructions for downloading and verifying model and serial numbers.
Procedure for adjusting white balance to ensure accurate color reproduction.
Details the RS-232C commands used for auto-adjustment.
Overview of the power supply distribution for different TV components.
Illustrates the EPI interface for panel communication.
Shows the block diagram for Power Management IC and Level Shifter.
Diagram showing connections for USB, Wi-Fi, remote control, and UART.
Identifies the main PCBs and their locations in the TV assembly.
Describes the system architecture for remote control communication.
Illustrates the block diagram of the MR13 Bluetooth remote control.
Details the procedures for pairing and unpairing the RF remote control with the TV.
Troubleshooting steps for no video or normal audio issues.
Troubleshooting steps for no video or no audio conditions.
Troubleshooting steps for the TV not turning on or showing no power.
Diagnoses and resolves issues related to unexpected power off or auto power cycling.
Troubleshooting guide for no audio or normal video symptoms.
Procedure to measure power board input voltages and ST-BY status.
Steps to check audio power supply voltages and speaker functionality.
Step-by-step guide for adjusting the VCOM value for optimal display performance.
