NC4H
ENG
✎ You can set one device per type.
✎ With the Screen Remote, you can only control the devices of a brand or
manufacturer that you can select in the setup screen.
✎ If you connect to a network before setting the universal remote control,
update for the latest manufacturer list is available.
✎ Some buttons may not work depending on the external device model.
✎ Place the device near the TV for seamless operation.
✎ If the device is in a drawer, open the drawer.
✎ Go to SMART ➾ Universal Control or SMART ➾ INPUT LIST ➙ Set the
Universal Control and add, delete, or change a device.
To Next Page
Loading...
