- 14-
LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
3.2 Function Check
3.5.1 Check display and sound
■ Check Input and Signal items. (cf. work instructions)
1. TV
2. AV
3. COMPONENT (480i)
4. HDMI
* Display and Sound check is executed by Remote controller.
☞ Caution : Not to push the INSTOP KEY after completion if the function inspection.
4. Total Assembly line process
4.1 Adjustment Preparation
■ W/B Equipment condition
CA210 : CCFL/EEFL è CH 9, Test signal : Inner pattern (80IRE)
LED è CH 14, Test signal : Inner pattern (80IRE)
■ Above 5 minutes H/run in the inner pattern. (“power on” key of adjust remote control)
Cool
11,000k
K
X=0.276 (±0.002)
All LCD and O/S LED(except
LGD),lamp over 26”
<Test Signal>
Inner pattern
(204gray,
80IRE)
◈ Edge LED W/B Table in process of aging time (Only LGD Edge LED Module)
CA210 : CH 14, Test signal : Inner pattern (80IRE)
Cool(13000K) Medium(9300K) Warm(6500K)
x y x y x y
S7LR2
Aging time
(Min)
269 273 285 293 313 329
1 0-2 280 287 296 307 320 337
2 3-5 279 285 295 305 319 335
3 6-9 277 284 293 304 317 334
4 10-19 276 283 292 303 316 333
5 20-35 274 280 290 300 314 330
6 36-49 272 277 288 297 312 327
7 50-79 271 275 287 295 311 325
8 80-149 270 274 286 294 310 324
9 Over 150 269 273 285 293 309 323