LG 32LX570M - User Manual

Other manuals for LG 32LX570M

Commercial Mode Setup Guide80 pages

Easy Setup Guide66 pages

Questions and Answers:

J
Joshua EwingAug 16, 2025
Why is my LG 32LX570M TV remote not working?
- V
  vrobinsonAug 16, 2025
  If your LG TV remote isn't working, ensure it's in TV Mode by using the MODE key, if applicable. Point the remote directly at the IR receiver on the TV. If the remote is too far away, move it closer, darken the room, and remove any obstructions blocking the path. Also, replace the batteries if they are weak, and ensure they are inserted with the correct polarity (+ and -). Finally, dim the room light if there's too much light interfering with the remote's signal. If none of these actions work, the remote IR codes may not match the settings in the TV. Make sure the Installer Remote is compatible and contact your LG representative if necessary. Check the settings both in the TV and on the remote.
D
David SalinasAug 19, 2025
Why does my LG TV have normal picture but no sound?
- Y
  yshortAug 19, 2025
  If your LG TV displays a normal picture but has poor or no sound, the issue could be due to a broadcast problem. Try tuning to a different channel to see if the sound returns. Alternatively, the audio might be muted. Press the MUTE button or use the Volume Up key to increase the sound level. Another possibility is that the pillow or TV speaker is not configured properly. Check that Installer Menu items 020 FEATURE LEVEL and 027 HOSPITAL MODE are set as required. If applicable, select TV Speaker in the Audio Menu.
H
heidibowenAug 22, 2025
What to do if no channels are present after Express Script on LG 32LX570M?
- S
  Sharon OliverAug 22, 2025
  If no channels are present on your LG TV after running the Express Script, it's likely that Auto Tuning was not run. Refer to the Express Script procedure to run Auto Tuning, which is necessary to populate the channel lineup. To reactivate the Express Script, restore the TV to a factory default condition.
J
jennasalazarAug 26, 2025
What to do if my LG 32LX570M TV has no picture?
- J
  Julie CarrollAug 26, 2025
  If your LG TV shows no picture, first ensure that the TV is turned ON. If it is, check that the antenna or cable is correctly connected to the TV. Verify all connections to the TV are secure. If you're using an MPI device, ensure the MPI cable is connected. The issue could also be due to an encrypted program, so try switching to another channel. Finally, check and adjust the Installer Menu settings to ensure the correct tuning band is selected.
A
Ashley EvansAug 28, 2025
What causes communication error on my LG 32LX570M TV?
- K
  Kara WatkinsAug 28, 2025
  If you encounter a Communication Error (Communications Timeout) on your LG TV, start by checking and connecting all communication cables. Ensure the TV power cord is connected and that the TV is turned ON, as determined by the default setting of Installer Menu item 118 POWER SAVINGS. If you're using the FTG Device Configuration Application, verify that you've selected the correct COM port for the cable being used.
W
Wendy HowardAug 31, 2025
How to fix 'Inactive TV' message on LG 32LX570M?
- F
  Francisco BradySep 1, 2025
  If your LG TV displays the message “Inactive TV” and then turns OFF, it's likely because the TV is set up to show this message when all channels are deleted from Channel Bank 4. To resolve this, simply select another channel bank (1, 2, or 3) to return the TV to normal operation.
K
Katie MatthewsSep 3, 2025
How to fix LG 32LX570M TV when I cannot enter channel number directly?
- K
  Kyle OwensSep 3, 2025
  If you can't directly enter a channel number on your LG TV, it might be because the TV is in Pass-through Mode and Installer Menu item 028 CH. OVERIDE is set to 0, which disables direct keypad entry. To enable it, set 028 CH. OVERIDE to 1. Alternatively, if the TV is in FTG Mode, the channel you're trying to enter might not be included in the FTG Channel Map. If needed, make changes to the FTG Channel Map using the FTG File Manager or the FTG Device Configuration Application.
J
Jeffrey HartSep 6, 2025
Why channel found during auto tuning does not tune in with channel up/down on LG 32LX570M TV?
- P
  Paul PowellSep 7, 2025
  If a channel found during Auto Tuning on your LG TV doesn't tune in with the Channel Up/Down buttons, the channel was likely deleted in the currently selected channel bank. Premium channels may only be available on another channel bank. To resolve this, modify the channel bank allocation(s) for the channel using the FTG Channel Map Editor in the FTG File Manager.
Q
qwigginsSep 9, 2025
Why is channel blanked in all channel banks on LG TV?
- A
  Alexis PorterSep 10, 2025
  If a channel is blanked in all channel banks on your LG TV, it's because blanking a channel in one channel bank makes it blank in all. To restore normal operation, modify the channel attributes using the FTG Channel Map Editor in the FTG File Manager. Uncheck the “Blank Video” checkbox for the channel to restore it across all channel banks.
J
jeffreyhoffmanSep 12, 2025
Why does LG 32LX570M TV show Input List Menu when CH. BANK is pressed?
- G
  Gregory AguirreSep 12, 2025
  If pressing CH. BANK on the Installer Remote of your LG TV brings up the Input List Menu, it indicates that Installer Menu item 027 HOSPITAL MODE is set to 0. To enable channel banks to appear when pressing the CH. BANK key, set item 027 to the appropriate setting.

LG 32LX570M Specifications

General

Screen shape	Flat
Response time	9 ms
Display diagonal	31.8 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Direct-LED
Contrast ratio (dynamic)	1000000:1
Contrast ratio (typical)	1200:1
Display diagonal (metric)	81.28 cm
Screen format adjustments	4:3, 16:9
Supported graphics resolutions	1366 x 768
Motion interpolation technology	-
3D	No
Cable lock slot type	Kensington
RJ-12 ports quantity	1
Tuner type	Analog & digital
Analog signal format system	NTSC
Digital signal format system	ATSC
Smart modes	Cinema, Energy saving, Game, Sports, Standard, Vivid
Sound modes	Game, Movie, Music, News, Sports, Standard
Audio decoders	Dolby Digital
RMS rated power	10 W
Number of speakers	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Audio formats supported	AAC, AC3, EAC3, MP3, PCM
Image formats supported	JPG
Picture processing technology	LG Triple XD Engine
Panel mounting interface	200 x 200 mm
AC input voltage	120 V
Power consumption (standby)	0.5 W
Power consumption (typical)	42 W
Package depth	114.3 mm
Package width	800.1 mm
Package height	510.54 mm
Package weight	6622.45 g
Certification	UL, FCC, cUL, NOM
Sustainability certificates	RoHS, ENERGY STAR
Cables included	AC