EXTERNAL EQUIPMENT SETUP
34
EXTERNAL EQUIPMENT SETUP
Manual Configure - Adjustment for screen Phase, Clock, Position
(RGB [PC] mode only)
Press the
MMEENNUU
button and then use or button
to select the
PPiiccttuurree
menu.
Press the button and then use or button to
select
SSccrreeeenn
.
Press the button and then use or button to
select
MMaannuuaall CCoonnffiigg..
.
Press the button and then use or button to
select
PPhhaassee
,
CClloocckk
,
HH--PPoossiittiioonn
,
VV--PPoossiittiioonn
.
Press the or button to make appropriate adjust-
ments.
Press the
MMEENNUU
button to return to TV viewing.
Press the
RREETTUUR
RNN
button to move to the previous
menu.
2
1
4
5
3
6
If the picture isn’t clear after auto adjustment and especially if characters
are still trembling, adjust the picture phase manually.
It’s not available to use Phase, Clock function in
COMPONENT(480i/480p/576i/576p/720p/1080i/1080p), HDMI
(480p/576p/720p/1080i/1080p).
CClloocckk
This function is to minimize any vertical bars or stripes visible
on the screen background. And the horizontal screen size will
also change.
PPhhaassee
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
1
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
DE F G
RETURN
2
Picture
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
Screen G
DE F G
RETURN
3 4 5
Screen
Auto config.
Manual Config.
XGA Mode
Reset
Manual Config. G
DE F G
RETURN
Phase 51
Clock 50
H-Position 50
V-Position 50
MFL41469207en-Edit1 8/22/08 8:54 AM Page 34
To Next Page
Loading...
