EasyManua.ls Logo

LG 35WN65C - User Manual

LG 35WN65C
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
* LG LED Monitor applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and
retain it for future reference.
35WN65C
OWNER’S MANUAL
LED LCD MONITOR
(LED Monitor*)
www.lg.com
Copyright © 2020 LG Electronics Inc. All Rights Reserved.

Other manuals for LG 35WN65C

Questions and Answers

  • S
    sshepherdSep 8, 2025
    What to do if my LG Monitor screen display is unstable and shaky?
    • A
      Adam RamirezSep 8, 2025
      If your LG monitor's screen display is unstable or shaky, or if images displayed on the monitor leave shadow trails, and the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Try changing the resolution to 1080p or the recommended resolution. Also, not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.
  • T
    Toni LawrenceAug 23, 2025
    Why is there no sound on my LG 35WN65C?
    • R
      Richard GarrisonAug 23, 2025
      If images are displayed without sound on your LG Monitor, first ensure that the headphone port connections are properly made. Then, try increasing the volume using the joystick. Finally, set the audio output of your PC to the monitor you are currently using.
  • K
    Kenneth MorrisAug 25, 2025
    Why is nothing displayed on my LG 35WN65C screen?
    • D
      David LewisAug 25, 2025
      There could be several reasons why nothing is displayed on your LG monitor's screen. First, ensure the power cord is correctly plugged into the power outlet and that the power cable connection is secure, then press the power button. Also, verify that the connected input is enabled in the monitor's settings under the Input section. This issue can also occur if the signal cable between your PC and the monitor is either missing or disconnected, so check the cable and reconnect it securely. Finally, the signals transferred from the PC (graphics card) might be out of the monitor's horizontal or vertical frequency range. Refer to the Product Specification section of the manual to set the appropriate frequency.
  • R
    Robert TapiaAug 26, 2025
    Why is there no sound from the headphone port on my LG 35WN65C Monitor?
    • M
      Mark RivasAug 26, 2025
      If there is no sound from the headphone port on your LG monitor, first ensure that the headphone port connections are made properly. If the connections are correct, try increasing the volume using the joystick. Also, make sure to set the audio output of the PC to the monitor you are using. Note that the settings may differ depending on the operating system you use.
  • A
    angela04Aug 27, 2025
    What to do if nothing is displayed on my LG 35WN65C screen?
    • S
      Sherry ChambersAug 27, 2025
      If nothing is displayed on your LG Monitor screen, try these steps: First, ensure the power cord is correctly plugged into the power outlet. Next, check the power cable connection and press the power button. After that, verify that the connected input is enabled in the monitor's settings under the Input option. Also, check the signal cable between the PC and the monitor to ensure it is properly connected. Finally, if the issue persists, the signals from your PC might be out of the monitor's frequency range. Refer to the Product Specification section of the manual to set the appropriate frequency.
  • B
    Bill HartSep 22, 2025
    What to do if I see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message on my LG 35WN65C?
    • C
      Carl OdonnellSep 22, 2025
      If you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message with your LG Monitor: * Install the display driver from the LG website: http://www.lg.com. * Check if your graphics card supports the Plug and Play function.
  • D
    Destiny RiosSep 16, 2025
    How to unlock menu options on my LG Monitor?
    • M
      Maria VanceSep 16, 2025
      If some functions are unavailable when you press the Menu button on your LG Monitor, disable OSD Lock in General settings.
  • L
    lwardSep 18, 2025
    Why does image sticking occur even when my LG Monitor is turned off?
    • C
      Catherine RobinsonSep 18, 2025
      If image sticking occurs on your LG Monitor even when it's turned off, it could be due to displaying a still image for a prolonged time, which may damage the screen and cause image retention. To extend the monitor's lifespan, use a screensaver.
  • S
    Shirley GreenSep 7, 2025
    How to prevent image sticking on LG 35WN65C?
    • A
      Ashley BryantSep 7, 2025
      If image sticking occurs on your LG Monitor, even when it's turned off, it may be due to displaying a still image for a prolonged time, which can cause damage to the screen, resulting in the retention of the image. To extend the lifetime of the monitor, use a screensaver.
  • R
    Robert MathewsSep 4, 2025
    Why is my LG Monitor screen display unstable and shaky?
    • A
      Amanda ColeSep 4, 2025
      An unstable or shaky display on your LG Monitor, or shadow trails on images, can be due to a few reasons. If you're using HDMI 1080i 60/50 Hz (interlaced) resolution, switch to 1080p or the recommended resolution, as the interlaced setting may cause flickering. Also, ensure your graphics card is set to the recommended (optimal) resolution. Not doing so may result in blurred text, a dimmed screen, a truncated display area, or misalignment. Setting methods vary by computer and operating system, and some resolutions may not be available depending on your graphics card's performance.

Summary

ASSEMBLING AND PREPARING THE MONITOR

PRODUCT AND BUTTON DESCRIPTION

JOYSTICK BUTTON OPERATION

Details the function and operation of the joystick button for monitor control.

USING THE JOYSTICK BUTTON

Explains how to use the joystick button for various monitor functions and settings.

INSTALLATION PROCEDURES

INSTALLING ON A TABLE

Instructions for placing the monitor on a table for proper ventilation and stability.

SECURITY AND MOUNTING OPTIONS

INSTALLING THE WALL MOUNT PLATE

Information on specifications for wall mounting and preparing the monitor.

INSTALLING ON THE WALL

Guidelines for mounting the monitor on a wall, including spacing for ventilation.

USING THE MONITOR

CONNECTING TO A PC

Instructions for connecting the monitor to a personal computer for display.

HDMI CONNECTION

Details on how to connect the monitor using an HDMI cable for video and audio.

CONNECTING DEVICES

USER SETTINGS

ACTIVATING THE MAIN MENU

Step-by-step guide on how to access and navigate the monitor's main menu using the joystick.

QUICK SETTINGS

Details on adjusting basic settings like brightness, contrast, volume, and color temperature.

PICTURE SETTINGS

Settings for adjusting picture modes, color, and other visual parameters.

PICTURE ADJUST

Detailed adjustments for brightness, contrast, sharpness, black level, and DFC.

SOUND SETTINGS

GENERAL SETTINGS

TROUBLESHOOTING

NO DISPLAY ISSUES

Common issues and solutions when the screen remains blank or shows no image.

UNSTABLE DISPLAY AND IMAGE TRAILS

Addresses problems with unstable display, flickering, or image ghosting.

UNRECOGNIZED MONITOR MESSAGE

Steps to resolve 'Unrecognized monitor' errors, often related to driver installation.

PRODUCT SPECIFICATION

RESOLUTION SUPPORT

Details the maximum and recommended resolutions for the monitor.

LG 35WN65C Specifications

General IconGeneral
Panel typeVA
Pixel pitch0.238 x 0.24 mm
Display diagonal35 \
Display technology-
Native aspect ratio21:9
sRGB coverage (typical)99 %
Contrast ratio (typical)2500:1
Display number of colors16.78 million colors
Digital vertical frequency48 - 100 Hz
Display brightness (typical)300 cd/m²
Supported graphics resolutions3440 x 1440
HDMIYes
DisplayPort version1.4
USB upstream port typeUSB Type-B
Tilt angle range-5 - 15 °
Panel mounting interface100 x 100 mm
On Screen Display (OSD) languagesDEU, ENG, ESP, FIN, FRE, GRE, ITA, JPN, KOR, POL, POR, RUS, SER
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (standby)- W
RMS rated power14 W
CertificationTÜV-Typ, CB, UL, FCC-B, ErP, CE, RoHS, REACH
Product colorBlack
Sustainability certificatesRoHS
Cables includedDC, DisplayPort, HDMI
Package typeBox
Package depth212 mm
Package width1001 mm
Package height531 mm
Package weight12200 g
Harmonized System (HS) code85285210
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)250.9 mm
Height (with stand)573 mm
Weight (with stand)8300 g
Depth (without stand)94.1 mm
Width (without stand)831.6 mm
Height (without stand)372.7 mm
Weight (without stand)6600 g

Related product manuals