VVCCRR
GG
If the S-VIDEO(Y/C) signal is received through the Euro scart socket 2 (AV2), you must change to
the S-Video2 mode.
GG
If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.
GG
If both S-Video and VIDEO sockets have been connected to the S-VHS VCR simultaneousiy.
only the S-Video can be received.
NOTE
1
1
2
Connect the Euro scart socket of the VCR to the
AA VV11
Euro scart socket on the set.
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select
AAVV11
input source with using the
IINNPPUUTT
button on
the remote control.
- If connected to
AAVV22
Euro scart socket, select
AA VV22
input source.
1
2
3
Connect the S-VIDEO output of the VCR to the
SS--VViiddeeoo
input on the set. The picture quality is
improved; compared to normal composite (RCA cable) input.
Connect the audio outputs of the VCR to the
AAUUDDIIOO
input jacks on the set.
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select
AA VV33
input source with using the
IINNPPUUTT
button
on the remote control.
1
2
4
3
When connecting with a Euro Scart
When connecting with an S-Video cable
To Next Page
Loading...
