Model name Tool Option1 Tool Option2
37LF65 2320 1701
42LF65 2324 1701
47LF65 2328 1701
37LY95 2384 1701
42LY95 2391 1701
47LY95 2395 1701
ADC AV Component RGB-PC
MSPG925FS PAL Model:215 (720P)
INPUT SELECT AV3 Pattern:65 Model: 3
Model:202(PAL-BGDHI) *720P/50Hz
(1024*768 60Hz)
7 Color Bar Pattern: 65
Pattern: 65
*PAL 7 Color Bar
Model Name Model Name(Hex)
37LF65 000000FC0033374C4636350A202020202020
37LY95 000000FC0033374C5939350A202020202020
42LF65 000000FC0034324C4636350A202020202020
42LY95 000000FC0034324C5939350A202020202020
47LF65 000000FC0034374C4636350A202020202020
47LY95 000000FC0034374C5939350A202020202020
- 20 -
2> HDMI (256Bytes)
* Detail EDID Options are below ( , , , , )
Product ID
Serial No : Controlled on production line.
Month, Year : Controlled on production line:
ex) Monthly : ‘09’ -> ‘09’
Year : ‘2006’ -> ‘10’
Model Name(Hex) :
Checksum : Changeable by total EDID data.
* Before AV ADC Calibration, should be executed the Tool
Option setting.
5. Method of Tool Option setting
5.1. Press ADJ Key in the Adjust remocon.
5.2. Select "Tool Option1 and 2" by using
(CH+/-) key,
and Press Number Key.
5.3. Model Table.
5.4. After changing, push the EXIT Key.
6. ADC Calibration
* Before adjusting White-balance , the AV ADC should be
done.
* Caution : - System control RS-232 Host should be "PC" for
adjustment.
- Before AV ADC Calibration, execute the "Panel
size selection" (only LCD model)
Model Name
Product ID Product ID
Analog Hex EDID Table
37LF65 30154 75CA CA75
37LY95 30156 75CC CC75
42LF65 40123 9CBB BB9C
42LY95 40125 9CBD BD9C
47LF65 40127 9CBF BF9C
47LY95 40129 9CC1 C19C
Model Name
Product ID Product ID
Digital Hex EDID Table
37LF65 30155 75CB CB75
37LY95 30157 75CD CD75
42LF65 40124 9CBC BC9C
42LY95 40126 9CBE BE9C
47LF65 40128 9CC0 C09C
47LY95 40130 9CC2 C29C
To Next Page
Loading...
