PREPARATION
7
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please con-
tact the dealer where you purchased the product.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.
Remote Control Power Cord
OOppttiioonn EExxttrraass
Cable Management
2- TV Bracket Bolts 2- TV Brackets,
2- Wall Brackets
Twister Holder
Arrange the wires with
the twister holder.
4-Bolts for stand assembly
(Refer to p.12)
3322//3377 iinncchheess mmooddeell oonnllyy
* Slightly wipe stained spot on the exterior only with the pol-
ishing cloth for the product exterior if there is stain or finger-
print on surface of the exterior.
* Do not wipe roughly when removing stain. Please be cautions
of that excessive power may cause scratch or discoloration.
Polishing Cloth
D-sub 15 pin Cable