LG 37LT670H User Manual

Automated Installation Routine Wizard
pages 11 – 13
Custom Master TV Setup
pages 14 – 17
Cloning Information
pages 28 – 36
FTG Mode of Operation
pages 37 – 48
EXPERIENCED INSTALLER
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
Lodging Guest Interactive Pro:Centric
®
TVs
© Copyright 2013 LG Electronics U.S.A., Inc.
P/N: 206-4213 (Rev E)
26LT670H 32LT670H 37LT670H 42LT670H
55LS675H

LG 37LT670H Specifications

General

Response time	- ms
Display diagonal	37 \
Display brightness	- cd/m²
Native refresh rate	60 Hz
LED backlighting type	Edge-Lit LED
Supported video modes	1080p
Contrast ratio (dynamic)	1000000:1
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	-
Cable lock slot type	Kensington
Tuner type	Analog & digital
Number of tuners	1 tuner(s)
Analog signal format system	NTSC
Digital signal format system	ATSC
Smart modes	Energy saving
RMS rated power	10 W
Number of speakers	2
DVI port	No
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Consumer Electronics Control (CEC)	SimpLink
Number of OSD languages	4
On Screen Display (OSD) languages	ENG, ESP, FRE, KOR
Audio formats supported	MP3
Image formats supported	JPG
Video formats supported	DIVX HD
Product color	Black
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Package depth	140 mm
Package width	1120 mm
Package height	660 mm
Package weight	13699 g
Certification	UL, cUL, NOM
Sustainability certificates	RoHS

Weight and Dimensions

Depth (with stand)	231 mm
Height (with stand)	592 mm
Weight (with stand)	11204 g
Depth (without stand)	67 mm
Width (without stand)	869 mm
Height (without stand)	533 mm
Weight (without stand)	9979 g

Summary

Important Safety Instructions

Commercial Mode Overview

Setup Checklist

List of items needed for commercial mode setup and installation.

Pass-through Mode

Mode for individual TV configuration or cloning purposes.

Automated Installation Routine Wizard

Wizard for automatic or manual TV configuration.

Custom Master TV Setup

Procedure to create a master setup for cloning.

Installer Menu

Menu for setting up TV operational parameters.

Cloning

Process of copying a Master TV Setup to a Target TV.

FTG Mode

Mode enabling Pro:Idiom decryption and logical channel mapping.

Pro:Centric Operation

Pro:Centric TV Interactive Menu Features

Features for guest interaction via Pro:Centric application.

Pro:Centric Interactive Menu Navigation

How to navigate the interactive menus on the TV.

Pro:Centric Setup

Configuration settings for Pro:Centric on the TVs.

Automated Installation Routine Wizard

Pro:Centric Auto Configuration

Automatic configuration of TV for Pro:Centric network.

Pro:Centric Manual Configuration

Manual entry of Pro:Centric settings for setup.

USB Configuration

Configuring TV for FTG Mode using a USB device.

Custom Master TV Setup

Cloning Methods

Different methods for cloning TV setups using USB or programmer.

Clonable TV Setup Menu Features

Features available for cloning across menu categories.

Custom Master TV Setup Procedure

Step-by-step guide to create a master TV setup.

Installer Menu

Accessing the Installer Menu

Steps to enter the Installer Menu using the remote.

Using the Installer Menu

How to navigate and change settings within the menu.

Exiting the Installer Menu and Activating Updates

Procedures for saving changes and exiting the menu.

Channel Icons / Custom Text Labels (2-5-4 + MENU Mode)

Adding/Editing Channel Labels on the Master TV

How to add custom text labels for channels.

Cloning Overview

Important Cloning Information

Key considerations before performing cloning procedures.

USB Cloning Procedures

Learn Setup from Master TV

Process to capture TV setup onto a USB device (.tlx file).

Teach Master TV Setup to Target TV

Process to transfer setup from USB to a target TV (.tlx file).

Learn Setup from Master TV

Capturing TV setup via USB using .tll file.

Teach Master TV Setup to Target TV

Transferring setup via USB using .tll file.

Clone Programmer Cloning Procedures

Learn Setup from Master TV

Capturing TV setup using TLL-1100A clone programmer.

Teach Master TV Setup to Target TV

Transferring setup using TLL-1100A clone programmer.

Learn Setup from Master TV

Capturing TV setup using LT2002 clone programmer.

Teach Master TV Setup to Target TV

Transferring setup using LT2002 clone programmer.

FTG Mode of Operation Overview

FTG Mode via CPU

Configuring FTG mode using the TV's CPU.

FTG Mode via EBL

Configuring FTG mode using the EBL module.

Determining the TV Operating Mode

How to check if the TV is in FTG or Pass-through Mode.

FTG Mode via CPU

Creating an FTG Configuration File using the FTG File Manager

Steps to create a .tlx file for FTG configuration.

Teaching FTG Configuration to a TV

Transferring the FTG configuration file to a TV.

Learning FTG Configuration from a TV

Saving an FTG configuration from a TV to a USB device.

Optional Manual Configuration / TV Setup

Manual setup steps if RF channels are unknown.

FTG Mode via EBL

FTG File Manager Utilities Overview

FTG File Manager Main Screen

Overview of the FTG File Manager interface.

FTG Channel Map Configuration Utility

Tool for creating and editing logical channel maps.

FTG Channel Map Editor

Interface for editing individual channel data and attributes.

FTG Installer Menu Configuration Utility

Utility for configuring FTG Installer Menu settings.

Remote Jack Pack / TV Connections & Setup

Remote Jack Pack Setup

Configuring the Remote Jack Pack (RJP) setting.

TV Connections

Physical connection of RJP and other cables to the TV.

Reference: Upgrading TV/PTC Software using a USB Memory Device

Checking the Software Versions

How to view current TV and PTC software versions.

Upgrading TV/PTC Software

Procedure for updating software via USB.

Reference: Downloading a Splash Screen using a USB Memory Device

Splash Screen Image File Guidelines

Requirements for splash screen image files.

Downloading a Splash Screen Image

Steps to upload a custom splash screen.

Reference: Restoring Factory Defaults on the TV(s)

Installer Menu Item 117 FACT DEFAULT

Using FACT DEFAULT to reset settings.

Additional FTG Mode via CPU Options

Options to restore FTG Mode TVs to Pass-through via CPU.

Additional FTG Mode via EBL Options

Options to restore FTG Mode TVs to Pass-through via EBL.

Reference: TV Zone Restrictions

Reference: LT670H Rear and Side Jack Panels

Reference: LS675H Rear and Side Jack Panels

Reference: External Speaker Setup

Reference: Installer Remote Control Typical Key Functions

Troubleshooting

General Troubleshooting

Quick tips for common TV issues.

Installer Remote

Troubleshooting specific to the Installer Remote.

Troubleshooting Flow Chart

Visual guide for diagnosing TV problems.

Commercial Mode Check

Flowchart to verify if the TV is in Commercial Mode.

FTG Operation Troubleshooting

Troubleshooting issues specific to FTG Mode.

Clone Programmer Troubleshooting

Issues related to clone programmers and cloning.

Glossary of Terms

Document Revision History / Open Source Software Notice