- 6 -
1. Application range
This spec sheet is applied to the 42"/37" LCD TV used LP7BA
chassis
2. Specification
Each part is tested as below without special appointment.
(1) Temperature : 25 ± 5°C(77 ± 9°F), CST : 40 ± 5°C
(2) Relative Humidity : 65% ± 10%
(3) Power Voltage : Standard input voltage (100-240V~,
50/60Hz)
*Standard Voltage of each products is marked by models
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 20 minutes prior
to the adjustment.
3. Test method
(1) Performance : LGE TV test method followed
(2) Demanded other specification
Safety : CE, IEC Specification
EMC : CE, IEC
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
4. General TV Specification
No Item Specification Remark
1. Video input applicable system PAL-D/K, B/G, I, NTSC-M, SECAM, PAL 60
2. Receivable Broadcasting System 1) PAL / SECAM BG
2) PAL / SECAM DK
3) PAL I/I I
4) NTSC
3. RF Input Channel PAL NTSC
VHF E2 ~ E12 2~83
UHF E21 ~ E69
CATV S1 ~ S20 1~71
HYPER S21~ S47
4. Input Voltage AC 100 ~ 240 V/50Hz, 60Hz
5. Market Non-EU
6. Active Screen Size 1067.308 mm (diagonal) 42.02 inches
940.3 mm (diagonal) 37.02 inches
7. Tuning System FVS 100 program
FS
8. Operating Environment 1) Temp : 0 ~ 40 deg
2) Humidity : 10 ~ 90 %RH
9. Storage Environment 1) Temp : -20 ~ 50 deg
2) Humidity : 10 ~ 90 %RH
10. Display LCD Module
To Next Page
Loading...
