LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
4.7. Outgoing condition Configuration
4.8. Internal pressure
Confirm whether is normal or not when between power
board’s ac block and GND is impacted on 1.5 kV(dc) or 2.2
kV(dc) for one second.
Push ＇IN STOP＇key ,then in-stop processing will start.
If processing is complete, TV will turn off automatically.
Must not AC power OFF during processing.
- 13 -
* Detail EDID Options are below
Product ID
(A,B,C,D,E,F)
MODEL Model name(HX)
All 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20
Model Name(Hex):
Checksum:
Vendor Speci
MODEL RGB HDMI1 HDMI2 HDMI3 HDMI4
HD 0x94 0x7B, 0xD5 0x7B, 0xC5 Not applied
FHD 0x1d 0xD7, 0x39 0xD7, 0x29 0xd7,0x19
0xd7,0x09
c(HDMI)
INPUT MODEL NAME(HEX) Remark
HDMI1 65 03 0C 00 10 00
HDMI2 65 03 0C 00 20 00
HDMI3 65 03 0C 00 30 00 B8 2D
HDMI4
65 03 0C 00 40 00 B8 2D
B8 2D
B8 2D
MODEL HEX EDID Table DDC Fuction
FHD 0001 01 00 Analog/Digital
Serial No: Controlled on production line.
Week, Year:Fixed as S/W released day(same as MES data)
ex) Week : 0x02(2), Year 0x13(2009)
To Next Page
Loading...
