- 4 -
LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
4. Module General Specification
1. Application range
This specification is applied to the LCD TV used
LT03B/D/E/N/T/S chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 25 ºC ± 5 ºC(77 ºF ± 9 ºF), CST: 40 ºC ± 5 ºC
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-120 V~ 50 / 60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CE, IEC specification
- EMC :CE, IEC
No. Item Specification Remark
1 Display Screen Device 105 cm(42 inch) wide color display module
2 Aspect Ratio 16:9
3 LCD Module 105 cm(42 inch) TFT WUXGA LCD
4 Operating Environment Temp. : 0 deg ~ 40 deg
Humidity : 0 % ~ 85 %
5 Storage Environment Temp. : -20 deg ~ 60 deg
Humidity : 0 ~ 85 %
6 Input Voltage AC 100-240V~, 50 / 60Hz
7 Power Consumption 98 FHD, 120Hz(Edge LED) LC420EUH-SCA1/2 - LE5500, LE7500
=LCD(Module)+Backlight(LED)
8 Module Size 973.2(H) x 566.2(V) x 10.8 mm(D) LC420EUH-SCA1/2 - LE5500, LE7500
8 Pixel Pitch 0.4845 (H) x 0.4845 (V) LC420EUH-SCA1/2 - LE5500, LE7500
9 Back Light CCFL/Edge-LED/IOP-LED
10 Display Colors 1.06 B(true) colors (10-bit)
11 Coating 3H(Hard coating), Anti-glare
To Next Page
Loading...
